Download
Share
Print this page
Vicon VND-970IP Configuration Manual
  1. Manuals
  2. Brands
  3. Vicon Manuals
  4. Security Camera
  5. I-ONYX VND-970IP
  6. Configuration manual

Vicon VND-970IP Configuration Manual

Hide thumbs Also See for VND-970IP:

Advertisement

Quick Links

Download this manual See also: Installation Operation & Maintenance
Configuration Guide
XX206-20-00
VMD Guide for VND-970IP Cameras
Vicon Industries Inc., 89 Arkay Drive, Hauppauge, New York 11788
Tel: 631-952-2288 Fax: 631-951-2288 Toll Free: 800-645-9116
24-Hour Technical Support: 800-34-VICON (800-348-4266) UK: 44/(0) 1489-566300
Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or that the
operation will be entirely error free or perform precisely as described in the documentation. This system has not been designed
to be used in life-critical situations and must not be used for this purpose.
www.vicon-security.com
Document Number: 8009-8206-20-00
Issued: 1010
Product specifications subject to change without notice.
Copyright © 2010 Vicon Industries Inc. All rights reserved.

Advertisement

loading
Need help?

Need help?

Do you have a question about the VND-970IP and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Vicon VND-970IP

Summary of Contents for Vicon VND-970IP

  • Page 1 24-Hour Technical Support: 800-34-VICON (800-348-4266) UK: 44/(0) 1489-566300 Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or that the operation will be entirely error free or perform precisely as described in the documentation. This system has not been designed to be used in life-critical situations and must not be used for this purpose.
  • Page 2 The Video Motion Detection (VMD) feature activates an alarm due to activity beyond specified sensitivities in preconfigured regions of interest (ROIs) in the camera view area. Since initial setup and configuration of VND-970IP cameras are not done through VNSetup software but through a Web Browser interface, the support for a VMD alarm event is generated by the camera and is defined and setup in the camera configuration.

  • Page 3: Camera Configuration

    Guide for Configuring and Using Video Motion Detection Camera Configuration This section explains how to configure the Vicon I-Onyx VND-970IP cameras for video motion detection (VMD feature) to work properly. The ViconNet system and the camera should be setup and connected before beginning this procedure.
  • Page 4 Guide for Configuring and Using Video Motion Detection Depending on the required operation, it may be necessary to configure more than one video stream. If recording is to be set to start only when motion is detected, it is only necessary to set up one stream with the desired parameters.
  • Page 5 Guide for Configuring and Using Video Motion Detection • Check Enable motion detection. • Click on to add a new window; up to three (3) windows can exist simultaneously. • Use the mouse to click, hold, and drag the window frame to resize or the title bar to move the window.
  • Page 6 Guide for Configuring and Using Video Motion Detection Configuring ViconNet Creating Macros The next step in supporting VMD alarms is to create a macro that defines what happens when motion occurs. After the macro is defined it is then linked to the external alarm of the NVR/Workstation.
  • Page 7 Record. The bottom portion of the screen displays. • Fill in all pertinent fields for the command. The VND-970IP cameras will not allow fps selection and the user will define the quality requested (Q1 for highest available stream, Q8 for lowest). In example no.
  • Page 8 Guide for Configuring and Using Video Motion Detection A second macro is now configured to tell the NVR what to do in the case of a VMD alarm; in the examples, command the NVR to record the camera at a different quality or display video from the camera.
  • Page 9 Guide for Configuring and Using Video Motion Detection Configuring the External Alarm The final step is to configure the external alarm on the Workstation/NVR to activate the macro upon receiving the VMD alarm. Each NVR/Workstation has 1 default External Alarm that can be edited to receive the VMD alarm from the camera and execute the macro.
  • Page 10 Guide for Configuring and Using Video Motion Detection • Define the time schedule for the macro in the Alarm Activity Time area; the default is 24 hours a day, 7 days a week. Press • From this Alarm Setup Wizard, select the macro previously created to be activated when the motion alarm occurs.
  • Page 11 Vicon Industries Inc. Corporate Headquarters 89 Arkay Drive Hauppauge, New York 11788 631-952-2288 800-645-9116 Fax: 631-951-2288 Vicon Europe Headquarters Brunel Way Fareham, PO15 5TX United Kingdom +44 (0) 1489 566300 Fax: +44 (0) 1489 566322 Vicon Germany Kornstieg 3 D-24537 Neumuenster...