Vicon Roughneck V910 Installation And Operation Manual
  1. Manuals
  2. Brands
  3. Vicon Manuals
  4. Security Camera
  5. ROUGHNECK V910
  6. Installation and operation manual

Vicon Roughneck V910 Installation And Operation Manual

Impact-resistant dome cameras
Hide thumbs Also See for Roughneck V910:
Table of Contents

Advertisement

Quick Links

See also: Operation & Installation Manual
XX137-20-00
V910 IMPACT-RESISTANT
DOME CAMERAS
Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet
your requirements or that the operation will be entirely error free or perform precisely as
described in the documentation. This system has not been designed to be used in life-critical
situations and must not be used for this purpose.
Copyright © 2010Vicon Industries Inc. All rights reserved.
Product specifications subject to change without notice.
Vicon and its logo are registered trademarks of Vicon Industries Inc.
Roughneck, ViconNet, Kollector and their logos are registered trademarks of Vicon Industries Inc.
Pixim is a trademark of Pixim, Inc.
VICON INDUSTRIES INC., 89 ARKAY DRIVE, HAUPPAUGE, NEW YORK 11788
TEL: 631-952-CCTV (2288) FAX: 631-951-CCTV (2288) TOLL FREE: 800-645-9116
24-Hour Technical Support: 800-34-VICON (800-348-4266)
UK: +44 (0) 1489 566300
WEB: www.vicon-cctv.com
Vicon part number 8009-8137-20-00
Rev 710

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Roughneck V910 and is the answer not in the manual?

Questions and answers

Related Manuals for Vicon Roughneck V910

Summary of Contents for Vicon Roughneck V910

  • Page 1 V910 IMPACT-RESISTANT DOME CAMERAS Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or that the operation will be entirely error free or perform precisely as described in the documentation. This system has not been designed to be used in life-critical situations and must not be used for this purpose.

  • Page 3: Fcc Notice

    FCC Notice Note: Complies with Federal Communications Commission Rules & Regulations Part 15, Subpart B for a Class A digital device. WARNING This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instruction, may cause interference to radio and television reception.
  • Page 4 The product shows a significant change in performance. 6. Attachments - Use only UL Listed Vicon recommended attachments to prevent unit damage and personal injury. 20. Replacement Parts - Use only Vicon specified replacement 7.

  • Page 5: Table Of Contents

    Shipping Instructions ....................... 35 Reference ........................... 36 Coaxial Cable Recommendations ......................36 Network Cable ............................365 Twisted-Pair Cable ............................26 Technical Information ....................... 39 Vicon Standard Equipment Warranty ................29 Contents • i XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...

  • Page 6: Quick Installation

    Quick Installation For complete detailed instructions on how to install the V910, read the Installation section. Installation Diagram ii • Quick Installation XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...

  • Page 7: Introduction

    The varifocal lens allows for lens adjustment capability and autoiris adjustment. The Roughneck V910 IP Camera Dome is a powerful IP video source for a complete digital video management system based on ViconNet® software. It is fully compatible with all ViconNet systems and is remotely managed and controlled from ViconNet workstations and Kollector®...
  • Page 8 Indoor/Outdoor; 1/3-in. Pixim day/night color camera with WDR and 9 - 22 mm varifocal 0.77 V910-D922V 9651-74 autoiris lens; PoE or 24 VAC capability; 18.0 isolated power input; heater; ViconNet (LAN) video/data transmission; NTSC/PAL. 4 • Introduction XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...
  • Page 9 *Note: Nominal power and current levels are calculated @ 24.0 VAC input line voltage. Includes heater. • 5 XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...

  • Page 10: Installation

    Installation Unpacking and Inspection All Vicon equipment is tested and inspected before leaving the factory. It is the carrier’s responsibility to deliver the equipment in the same condition as it left the factory. Inspection for Visible Damage Immediately inspect the cartons upon delivery. Make a note of any visible damage on all copies of the carrier’s freight bill.
  • Page 11 MAC Address Installation • 7 XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...
  • Page 12 Figure 1 Exploded View 8 • Installation XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...

  • Page 13: Accessory Kit

    Accessory Kit There is an accessory kit included with the Roughneck V910. The table below lists the contents. Description Quantity Tamperproof driver bit, ¼ hex T-15 (to remove tamperproof screws) Pipe sealant tape (to seal pipe fitting to housing) Lug (for grounding)
  • Page 14 NOTE: Failure to thoroughly coat threads will result in moisture entering the housing and eventual failure of the unit. Note: For outdoor installations, Vicon recommends that the vent plug should only be used if fogging conditions exist. Additionally, if the side cable access hole is used, the base must be mounted so the hole is pointed directly downward.
  • Page 15 TOP of the camera. Make sure the camera/lens is installed so that the label is on the top for proper video display. Figure 4 Camera Position and Lens Adjustments Installation • 11 XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...

  • Page 16: Cable Connections

    Connect one end of this cable to J4 and the BNC connector to the camera. Refer to Figures 5B. HEATER BRACKET SLOT Figure 5B - Camera/Lens PC Board (Fiber version) 12 • Installation XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...
  • Page 17 Refer to Figure 7 or 8. A cable assembly is provided in the accessory kit of the IP model for connection. Figure 5C Camera/Lens PC Board (IP version) Installation • 13 XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...

  • Page 18: Camera Power Connections

    Table 2: Wiring Connections Dome Power Connections Note: Vicon systems and components, like most electronic equipment, require a clean, stable power source. Voltage irregularities such as surges, drops, and interruptions can affect the operation of your equipment and, in severe cases, damage certain components.

  • Page 19: Heater Connections

    Below is a summary of the OSD screens for camera setup of the day/night version. An explanation of the individual screens follows. The menus for the WDR camera are described after that. Installation • 15 XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...
  • Page 20 9. E X IT MIRROR EXIT SHARPNESS SAVE & EXIT GAMMA FACTORY SET FREEZE NEGA 3D_DNR D_ZOOM 5. M OT ION MOTION SET WINDOW ALL SET ALL CLEAR SENSITI SHOW INDI DELAY OUT 16 • Installation XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...

  • Page 21: Lens/Autoiris Adjustment

    White Balance can be directly adjusted by user in Manual mode. In that case, select R-Y or B-Y Gain to adjust the value of Red and Blue Gain (125 is default). Installation • 17 XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...
  • Page 22 The nega setting can be turned ON or OFF (default). On reverses the color, appearing as a negative image. 3D DNR The Digital Noise Reduction function adjusts the illuminance noise level in low light situations. It can be set to OFF, LOW, MIDDLE (default) or HIGH. D-Zoom 18 • Installation XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...

  • Page 23: Privacy Mask

    Delay out of 1-15 sec can be selected, which delays the display of the alarm signal on the screen. Privacy Mask Up to six privacy mask zones can be created on the screen to block video that is desired to be hidden. Installation • 19 XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...
  • Page 24 Privacy masks can be turned ON or OFF (default). When turned ON, the mask range is used to shape and locate the mask on the screen. One of eight colors of the mask can be selected. 20 • Installation XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...
  • Page 25 Select language from ENGLISH (default) or KOREAN. Baud Rate Select the data communication speed from 2400, 4800, 9600 (default), 14400, 19200 or 38400. Omni Lens This camera does not support the Omni lens at this time. Installation • 21 XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...
  • Page 26 Moving the joystick up or down chooses the desired menu selection. Moving the joystick to the right or left chooses the desired menu feature adjustment. (Right and Left directions are marked.) The menu system for the WDR version of the camera follows. 22 • Installation XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...
  • Page 27 BAUD BATE : 2400,4800,9600,19200 NORMAL RESOLUTION HIGH AE PREFs HIGHLIGHTS or SHADOWS VIDEO OUTPUT C or C-Y/C EXIT NO CHANGES SAVE NEW AND EXIT EXIT RESTORE FACTORY SETTINGS VERSION INFORMATION Installation • 23 XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...

  • Page 28: Low Light

    BW Level 20 to 35 (default is 31); BW Color level 0 to 10 (default is 5). • COLOR: camera stays in day mode. • BW: camera stays in night mode. 24 • Installation XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...

  • Page 29: Advanced Menu

    • SAVE NEW AND EXIT: Save all changes made before exiting the menu system • RESTORE FACTORY SETTINGS: Revert all settings back to factory defaults • SW REV: Version information Installation • 25 XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...

  • Page 30: Final Installation

    Any alignment of holes and screws is acceptable. The cover can be rotated 90° by aligning the screws/holes differently. 26 • Installation XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...

  • Page 31: Configuring The Viconnet (Ip/Lan) Version

    Although the ViconNet software does not limit the number of Groups and Users that can be created, the Roughneck V910 Camera Dome has Users and Groups limitations. For ViconNet version 5, the dome can support the first 20 Groups (including Administrators and Guests) and the first 100 Users.
  • Page 32 Nucleus authentication, allowing you access to all units in the network. 3.1. Unit authentication - On the Unit password field, enter the unit password and press the Add 28 • Installation XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...
  • Page 33 Note: In order for the DHCP option to work properly, verify that the server does not expire the IP address licensed to the camera. (Camera should always receive the same IP address from the DHCP server.) Installation • 29 XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...
  • Page 34 The Install TAB allows the user to install/upgrade newer versions. Choose the correct version and click Install to send to the selected unit. Install Info Tab The Info TAB displays the selected IP product general information/ Info 30 • Installation XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...

  • Page 35: Advanced Tab

    Default setting is 1500. This setting also allows the VOX mechanism to be deactivated, having audio ON all the time. VOX Off Threshold – Defines the audio level at which the input shuts OFF. Default setting is 1200. Installation • 31 XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...

  • Page 36: Viconnet Configuration

    Open the Network Setup and Site Name setup window. Network Settings window will display. See Figure below. Change the required parameters and click OK. (See your IT administrator for specific network parameters.) Application of the camera will restart. 32 • Installation XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...

  • Page 37: Viconnet (Ip/Lan) Version Operation

    Refer to the most recent version of the ViconNet workstation manual XX113 for complete information on operation. A copy of the manual can be found on the CD included. Installation • 33 XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...

  • Page 38: Operation

    Operation When power is applied to the camera, the Roughneck V910 views the selected scene. Maintenance The Roughneck V910 Impact-Resistant Cameras require no scheduled maintenance except for the occasional cleaning of the lower dome. Care and Cleaning of Lower Dome The inside surface of the smoked (gray-tinted) dome is easily scratched.

  • Page 39: Shipping Instructions

    Shipping Instructions Use the following procedure when returning a unit to the factory: 1. Call or write Vicon for a Return Authorization (R.A.) at one of the locations listed below. Record the name of the Vicon employee who issued the R.A.

  • Page 40: Reference

    Coaxial Cable Recommendations Caution: Careful selection of proper cable is essential to obtain the best performance from this equipment. Vicon assumes no responsibility for poor performance when cables other than those recommended, or equivalent, are installed. In all cases, coaxial cable impedance should be 75 ohms.

  • Page 41: Network Cable

    Network Cable Caution: Careful selection of proper cable is essential to obtain the best performance. Vicon assumes no responsibility for poor performance when cables other than the recommended types, or equivalent, are used. Materials Use pure copper stranded conductors to obtain a low DC resistance. The preferred insulation and cable jacket is Polyvinyl chloride (PVC).
  • Page 42 Twisted-Pair Cable Caution: Careful selection of proper cable is essential to obtain the best performance. Vicon assumes no responsibility for poor performance when cables other than the recommended types, or equivalent, are used. Materials Use a pure copper stranded conductor with or without a tin-plating to obtain a low DC resistance. Do not use cable with either steel or aluminum stranded conductor because they do not transfer signals effectively for long distances.

  • Page 43: Technical Information

    100 ft (active receiver) (152 m to 305 m). Fiber: up to 1.6 mi (2.5 km), pending optical cable loss. *Note: Nominal power and current levels are calculated @ 24.0 VAC input line voltage. Technical Information • 39 XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...
  • Page 44 Total Diameter: 6.1 in. (155 mm). Dome Diameter: 4.7 in. (119 mm). Weight: Approximately 4 lb (1.8 kg). Construction: Base/Cover: die-cast aluminum. Dome: polycarbonate plastic. Finish: Base/Cover: painted light beige. Dome: smoked. 40 • Technical Information XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...
  • Page 45 -40 to 150° F (-40 to 65° C). Storage Humidity: Up to 90% relative, non-condensing. Wind Load: Heavy rain or snow driven by winds up to 80 mph. (Not evaluated by UL.) Technical Information • 41 XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...
  • Page 46 OSD selectable Lens Specifications Model Focal Length Field-of-View (mm) Horizontal Vertical 3.3 - 12 varifocal with autoiris 83.9° -.23.91° 61.9°- 17.93° 9-22 varifocal with autoiris 31.2° -.12.8° 22.8° - 9.6° 42 • Technical Information XX137-20-00 Rev 710 Roughneck V910 Dome Cameras...

  • Page 47: Vicon Standard Equipment Warranty • 43

    Vicon Security Management Systems (SMS) All Models: All hardware is warranted for two years from date of original retail purchase. Any product sold as “special” or not listed in Vicon’s commercial price list: One year from date of original retail purchase.
  • Page 48 Vicon Industries Inc. Corporate Headquarters 89 Arkay Drive Hauppauge, New York 11788 631-952-CCTV (2288) 800-645-9116 Fax: 631-951-CCTV (2288) Vicon Europe Headquarters Brunel Way Fareham, PO15 5TX United Kingdom +44 (0) 1489 566300 Fax: +44 (0) 1489 566322 Vicon Germany Kornstieg 3...

Table of Contents