Table of Contents
Advertisement
Quick Links
Quick Guide
Roughneck V2100B Series
Outdoor Bullet Cameras
XX318-30-02
Vicon Industries Inc. does not warrant that the functions contained in this equipment will
meet your requirements or that the operation will be entirely error free or perform precisely as
described in the documentation. This system has not been designed to be used in
life-critical situations and must not be used for this purpose.
Document Number: 8009-8318-30-02 Product specifications subject to change without notice.
Issued: 9/2020 Copyright © 2020 Vicon Industries Inc. All rights reserved.
Vicon Industries Inc.
Tel: 631-952-2288) Fax: 631-951-2288
Toll Free: 800-645-9116
24-Hour Technical Support: 800-34-VICON
UK: 44/(0) 1489-566300
www.vicon-security.com
(800-348-4266)
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vicon Roughneck V2100B Series
Summary of Contents for Vicon Roughneck V2100B Series
- Page 1 Roughneck V2100B Series Outdoor Bullet Cameras XX318-30-02 Vicon Industries Inc. does not warrant that the functions contained in this equipment will Vicon Industries Inc. Tel: 631-952-2288) Fax: 631-951-2288 meet your requirements or that the operation will be entirely error free or perform precisely as Toll Free: 800-645-9116 described in the documentation.
-
Page 2: Table Of Contents
V2100B Series | Quick Guide Table of Content Product Overview Physical Characteristics Installation and Connection Package Contents Installation 2.2.1 Checking Appearance 2.2.2 Mounting & Wiring 2.2.3 Adjusting the Camera Position 2.2.4 Adjusting the Protection Shield Hood Connection Network Topology System Requirements Connecting Process 3.3.1 Default IP address... - Page 3 V2100B Series | Quick Guide WARNING ⚫ This camera operates at 12 VDC/PoE (IEEE 802.3af Class 3). ⚫ Installation and service should be performed only by qualified and experienced technicians and comply with all local codes and rules to maintain your warranty. ⚫...
- Page 4 V2100B Series | Quick Guide FCC Compliance Statement Information to the user: This unit has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
-
Page 5: Product Overview
V2100B Series | Quick Guide 1 Product Overview 1.1 Physical Characteristics V2100B Bullet Series 4.04 (102.71) 2.9 (74.4) 6.9 (174.1) V2100B Mini Bullet Series 2.8 (72.7) 2.9 (74.4) 5.7 (145.3) Figure 1 – 1: Physical Dimension Unit: in. (mm) - Page 6 V2100B Series | Quick Guide V2100B V2100B Mini Figure 1 - 2: Parts Pictorial Index Name Description Connect an Ethernet cable terminated with RJ-45 connector to RJ-45 Ethernet/PoE Port the PoE RJ-45 port for both power supply and network connectivity purposes simultaneously. For powering on the camera via 12 VDC power source.
- Page 7 V2100B Series | Quick Guide Figure 1 - 3: Internal Interface Pictorial Index Interface Description Micro SD card slot Insert a micro SD card into the slot for recording and file storage. Signal LED Indicates network data is being transmitted. Reset Button Press the button for less than 1 second to reboot the camera.
-
Page 8: Installation And Connection
V2100B Series | Quick Guide 2 Installation and Connection Package Contents Check if all items listed below are included in the packing box. ⚫ Network IR Bullet Camera * 1 Printed Quick Guide * 1 ⚫ ⚫ Guide Pattern * 1 ⚫... -
Page 9: Mounting & Wiring
V2100B Series | Quick Guide 2.2.2 Mounting & Wiring Step 1. Mounting Preparation ⚫ Use the guide pattern to mark out and prepare a mounting area. Place the supplied guide pattern on a mounting surface. Drill 6 mm (0.25”) outer holes x 3 at the mounting surface corresponding to the 3 indicated positions for plastic anchors. - Page 10 V2100B Series | Quick Guide Step 3. Wiring the Camera 1. While mounting the camera, pass the PoE Port and 12 VDC Port cable from the mounting bracket, through the hole of mounting surface or place them by the side hole of the mounting bracket as the following figures shown depending on your different applications.
-
Page 11: Adjusting The Camera Position
V2100B Series | Quick Guide 2.2.3 Adjusting the Camera Position ⚫ Pan Adjustment (A) Rotate the A joint to adjust the camera horizontally for a variety of installations. ⚫ Tilt Adjustment (B) Tilt the B joint to adjust the camera vertically for a variety of installations. ⚫... -
Page 12: Adjusting The Protection Shield Hood
V2100B Series | Quick Guide 2.2.4 Adjusting the Protection Shield Hood This camera is designed with capability to operate under rugged environments and may possibly be subject to the influence from sunlight or rain. The protection shield hood is attached to the camera to prevent impact from those outside effects. -
Page 13: Connection
V2100B Series | Quick Guide 3 Connection Network Topology The camera, which is equipped with Ethernet RJ-45 network interface, can deliver live view image in real time via both Internet and Intranet manners. Review the topology drawings shown below Figure 3 - 1: Network Topology System Requirements The table below lists the minimum requirement to implement and operate the camera. -
Page 14: Connecting Process
V2100B Series | Quick Guide Connecting Process 3.3.1 Default IP address Since this is a network-based camera, an IP address must be assigned. The camera’s default IP address is obtained automatically through a DHCP server in your network; be sure to enable DHCP in "Network Settings."... - Page 15 V2100B Series | Quick Guide Viewing Preparation Images of the unit can be viewed through various browsers. Before viewing, follow these steps to enable the display. Enable Cookies per instructions below: In Internet Explorer, click Internet Options on the Tools menu. ...
- Page 16 V2100B Series | Quick Guide Scroll down to the ActiveX controls and plug-ins radio buttons and set as follows: 【Download signed ActiveX controls】➔ Prompt (recommended) 【Download unsigned ActiveX controls】➔ Prompt 【Initialize and script ActiveX not marked as safe for scripting】➔ Prompt Figure 3 - 4: Security Settings 2/4 【Automatic prompting for ActiveX controls】➔...
- Page 17 V2100B Series | Quick Guide 【Run ActiveX controls and plug-ins】➔ Enable 【Script ActiveX controls marked safe for scripting*】➔ Enable Figure 3 - 6: Security Settings 4/4 Press OK to save the settings. Close the all browser windows and restart the browser. This will allow the new settings to take effect.
-
Page 18: Ip Toolbox
Note that IP Toolbox works only in Microsoft Windows XP, Microsoft Windows Vista, and Microsoft Windows 7 or above. Steps to get the utility program running are listed below. Download the IP Toolbox folder to local computer. The latest IP Toolbox can be found on Vicon’s website Camera Software Download page, vicon-security.com. - Page 19 V2100B Series | Quick Guide can input certain keywords into the field and also narrow down the range by selecting the criteria from the dropdown menu for a target search on cameras connected. Press “Auto Set IP Address” button to automatically give each camera an IP address from predefined range and connected to predefined network internet controller.
- Page 20 V2100B Series | Quick Guide Follow the steps below to complete firmware upgrade: ▪ Click to add or remove camera to be upgraded (only verified cameras will be shown on this list). ▪ Select a camera or click “Select All” button to select a camera or all the cameras on the firmware upgrade list, respectively.
Need help?
Do you have a question about the Roughneck V2100B Series and is the answer not in the manual?
Questions and answers