Installation Using The Vehicle's Lap And Shoulder Belt And Top Tether; Selecting A Vehicle Seating Location - KIDDY World Plus Instruction Manual

5.2.2 Installation using the vehicle's lap and shoulder
belt and top tether
WARNING
!
• Snuggly adjust the vehicle belt and protection shield around your child.
• The vehicle belt must stay snuggly adjusted around car seat when in use.
• Secure the top tether to the vehicle whenever possible.
• An unsecured connector or tether hook can injure occupants in a crash.
Store LATCH connectors and tether hook when not in use.
• Do not use the LATCH lower connectors when installing with a vehicle
seat belt.
Use top tether whenever possible. Store top tether when not in use.
Unbuckle protection shield buckle and store both LATCH connectors into the
storage pockets at the sides of the car seat (section 7.1).

Selecting a vehicle seating location:

Fig. 30
If the vehicle does not have a tether anchor, contact your vehicle dealer or
vehicle manufacturer for tether anchor information.
Center car seat on the vehicle seat between seat belt anchorages so that the
back of the car seat contacts the vehicle seat back (Fig. 30).
DEATH or SERIOUS INJURY can occur
Select a vehicle seating location equipped
with lap and shoulder belt and top tether
anchorage (if available) (Fig. 30).
To locate a seating position with a top tether
anchor, check the vehicle owner's manual
or contact your car dealer or manufacturer.
NOTE: If a tether anchor is not available,
store the tether assembly in the storage
pocket in back of headrest. See section 7.2
for information on how to store top tether.
23