Installation In Vehicle; Installation Steps - KIDDY kiddyfix Directions For Use Manual

4. Installation in vehicle

Never use another attachment (bracket) than described in this manu-
al or on the product label!

4.1 Installation steps

The support leg (F) must be folded out prior to installation in the vehicle.
For this purpose, pull the yellow support base handle (I) at the front (Fig. 4,
No. 1), slide the support base (G) slightly inwards and fold the support leg
(F) out (Fig. 4, No. 2).
This closes the power circuit for the electric release and the sound signals.
You kiddyfix is now automatically switched on.
Now check whether the anchoring system of your kiddyfix is released by
pressing both yellow ISOFIX unlatching buttons (E) at the top on the sides of
the support leg (F) (Fig. 5).
Press (click) both funnels guides (M) onto the brackets between the seat and
backrest of the vehicle seat (Fig. 6).
Now slide the yellow connectors (L) onto the metal brackets and press
tightly against it.
Proper latching is confirmed by a sound signal as well as the green ISOFIX
display (E) (Fig. 7).
Test whether both connectors (L) have latched in by pulling on it.
All manuals and user guides at all-guides.com
Prior to installation, check whether your vehicle is
fitted with ISOFIX brackets (metal brackets between
the seat and backrest) and consult the vehicle type list
and vehicle user manual!
6
ENG