Table of Contents
Advertisement
6.4.2 Dismantling of shoulder belt
Fig.21
Fig.22
Fig.23
Fig.24
Open the buckle. Weave the lap belt from the
side belt tongues underneath the inner cover
(fig. 21/22).
Weave the belt through both slots on the
seat pan as well as through the slot in the
cover. (Fig. 22).
Remove both buckle tongues from the belt
(fig.23)
Pull both belt straps through the inside cover,
through the head part and rear panel. Feed
the belt on the back of the seat pan from the
tie loop with the central belt adjustment (fig.
24).
15
ENG
Advertisement
Table of Contents
