Table of Contents
Advertisement
setup tool
❖
RTP Port Range
•
Set up the range of port number to use for RTP
Protocol.
The Start number of RTP Port has to be even number
and the last number must be greater than the start
number +4. I.e. the difference should be at least 4.
❖
RTP Multicast Address
•
Set up IP Address for RTP/UDP Multicast.
❖
RTP Multicast Port
•
Set up Port number used in RTP/UDP Multicast.
It is noted that RTP Multicast Port must be a even
number.
❖
RTP Multicast TTL
•
Set up TTL for RTP/UDP Multicast. TTL is a
number between 0 ~ 255.
USER
❖
Login Authentication
•
You can determine whether to require login
authentication for users.
If it is set to <Enable>, the users can connect to
the system through login authentication, while it
is set to <Disable>, the users can connect to the
system without login authentication. However,
users connected to the system without login have
USER permission.
When the setting is complete, click the [Apply]
button.
❖
User Login ID/Password List
•
Shows user ID, password and level (permissions)
in a list.
You can register up to 10 users.
The default administrator ID is "root".
<Administrator> cannot be deleted or added and
you can change the password only.
For the ID and password, up to 9 alphanumeric and some
special characters are allowed.
You cannot register a duplicated user ID.
You cannot register root or guest user ID.
60 – 10x Network Mini Smart Dome Camera
About User Level
Administrator
The Administrator can use all functions and
change the PTZ control, setup or search.
Operator
The Operator can use all function except
setup and search functions.
User
The User can monitor video only.
LANGUAGE
You can select once from 7 languages (English/Korean/
Chinese/French/Italian/Spanish/German).
DIGITAL IMAGE STABILIZER
❖
DIS Function
•
DIS (Digital Image Stabilizer) is a function to
compensate the shaken image. Owing to DIS
function, clear image can be obtained regardless
of vibration or shaking from the environment.
Especially, this function can be powerful when
camera is mounted on long pole, in the bridge,
beside freeways, or in the windy region.
DIS Function is not effective to analog video form BNC
Video Out but only effective in the digital video though IP
networks. (i.e. Web viewer or NVR)
❖
DIS Setup
•
Select one from Weak, Medium, and Strong. If you
select Strong, you can obtain a sharper, but higher
vibrating or shaky image comparing to Weak, and
Medium.
Advertisement
Table of Contents
