System Setup - Samsung SNC-C6225 User Manual

how to use osd menu
• SHUTTER
[ESC/A. Flicker/Manual(×128~1/120000 sec)]
If Iris is set to Manual and Shutter Speed is set to
ESC, Shutter Speed should have highest priority.
If Shutter Speed is set to A. Flicker, to remove Flicker,
Shutter Speed should be set to 1/100 sec. for NTSC
and 1/120 for PAL.
• AGC [OFF/NORMAL/HIGH]
Enhances image brightness automatically in case that
luminance level of image signal is too low.
• DNR [OFF/LOW/MIDDLE/HIGH]
Enhances images by deducting noises when gain level
of images is too high.
• SENS-UP [AUTO(2~128)/OFF]
Activates Slow Shutter function when luminance of
image (signal) is too dark.
It is possible to set up the maximum number of frames
piled up one on another by Slow Shutter function.

SYSTEM SETUP

SYSTEM SETUP
<RELAY TYPE>
<PASSWORD>
<SET HOME POSITION>
<SET NORTH DIRECTION>
LANGUAGE
<FAN/HEATER SETUP>
BACK
EXIT
• SYSTEM SETUP
You can set up RELAY TYPE, PASSWORD, HOME
POSITION, NORTH DIRECTION, LANGUAGE.

<FAN/HEATER SETUP> menu is only available in
C7225 model.
RELAY TYPE SETUP
RELAY1 NORMAL OPEN
BACK
EXIT
36 – 10x Network Mini Smart Dome Camera
ENGLISH
• RELAY TYPE SETUP
Contact type of 1 Ch, RELAY OUTPUT is defi ned.
[NORMAL OPEN / NORMAL CLOSE]
EDIT PASSWORD
[█ ]
----------
1234567890
ABCDEFGHIJ
KLMNOPQRST
UVWXYZabcd
efghijklmn
opqrstuvwx
yz<>-/:.
• EDIT PASSWORD
You can defi ne 4 characters long password. If this
function is set to ENABLE, it is required to type this
password whenever to enter OSD MENU.
It is noted that DEFAULT PASSWORD : "4321"
OK
CANCEL
DISABLE