Table of Contents
Advertisement
setting static ip
MANUAL NETWORK SETTING
Run the <IP Installer.exe> program and display the camera list found on the screen.
For the initial run, the [Auto Set] and [Manual Set] button are all disabled.
1.
Select a camera you want from the camera list.
•
Confi rm the MAC Address of the camera on its base panel.
•
Check the MAC address in System Information under the
Setup menu of the camera.
•
The [Auto Set] and [Manual Set] button are activated.
2.
Click the [Manual Set] button.
•
The Manual Set window appears.
•
The <IP Address>, <Subnet Mask>, <Gateway> and <HTTP
Port> values of the camera are displayed in their default values.
•
The password is set to "4321" by factory default.
3.
Set up the IP related settings in the <ADDRESS> fi eld.
•
<MAC Address>: The MAC Address is automatically
displayed. No additional setting is required.
If using an IP router :
•
<IP Address>: Set it according to the private IP address range
provided by the IP Router.
ex) 192.168.1.2~254, 192.168.0.2~254, or 192.168.
XXX.2~254
•
<Subnet Mask>: The IP Router's <Subnet Mask> becomes
camera's <Subnet Mask> value.
•
<Gateway>: The IP Router's <Local IP Address> becomes
camera's <Gateway> value.
If not using an IP router :
•
For the <IP Address>, <Gateway> and <Subnet Mask> settings,
contact your network administrator.
For the menu location of Internet Connection Type or DHCP selection, refer
to the IP router's documentation.
46 – 10x Network Mini Smart Dome Camera
1
3
3
2
Advertisement
Table of Contents
