Table of Contents
Advertisement
❖
User ID
•
Enter a user account ID to connect to login the FTP
server.
❖
Password
•
Enter a user account password to login the FTP
server.
❖
Test
•
To test FTP transmission, Click [Test] button.
Connect to the confi gured FTP server and conduct
image transmission test automatically.
When the FTP server connection and transmission
tests are complete, the <Verifi ed> message will be
displayed.
If the test fails, an error message appears. In
this case, check the FTP server status and the
confi gured settings once again.
E-mail(SMTP) Transfer
You can transfer an alarm image through Email. This
function supports SMTP Email server only. When the
initial SMTP server setting and connection are not
verifi ed, the <Not verifi ed> message appears.
❖
Use SSL/TLS
•
Choose whether SSL/TLS secure e-mail will be
used. To use this, corresponding SMTP Server
must support SSL/TLS.
❖
SMTP Server Address
•
Enter the IP address of an SMTP server to be used
to send an Email. ex) smtp.hotmail.com
❖
Port
•
Although SMTP server port is 25 as a default, you
can change the port number according to the
SMTP server settings.
(Default port number for SSL/TLS is 465.)
setup tool
❖
User ID
•
Enter a user account ID to connect to connect the
SMTP server.
❖
Password
•
Enter a user account password to the SMTP
server.
❖
E-Mail Sender
•
Enter the address of the Email sender. If the sender
address is incorrect, the Email from the sender may
be classifi ed into SPAM mail by the SMTP server
and may not be sent.
❖
E-Mail Receiver
•
Enter the address of the Email recipient.
❖
Title
•
Enter the title of the Email.
❖
Message
•
Enter the contents of the Email. An alarm image is
attached to the Email as an attached fi le.
❖
Test
•
To test SMTP transmission, Click [Test] button.
Connect to the confi gured SMTP server and
conduct image transmission test automatically.
When the SMTP server connection and
transmission tests are complete, the <Verifi ed>
message will be displayed.
If the test fails, an error message appears. In this
case, check the SMTP server status and the
confi gured settings once again.
RECORD SETUP
❖
SD Card
•
Enables you to verify data saved on the Micro
SDHC memory card and format the memory card
itself. It is possible to set to automatically delete
movie clips recorded before a certain period of time
(e.g. 1 week, 1 month, or 1 year).
English – 63
Advertisement
Table of Contents
