PARTS NAME & FUNCTIONS
❖
SNC-C6225
Surface Mount Bracket
Mounting Hole
Main Body
Lockup Screw
Dome Cover
Main Unit / Surface Mount Bracket
•
Dome Cover
Do not remove the protection vinyl from dome cover
before fi nishing all installation process to protect dome
cover from scratches or dust.
•
Surface Mount Bracket
This is used to install the camera directly on the
ceiling. After separating this cover, mount this bracket
on to ceiling. Main body of the camera is going to be
assembled again in the last stage.
Do not use this bracket with wall mount bracket or
ceiling mount bracket.
introduction
Back of Main Unit
•
Lockup Screw
Fixes main unit brackets like surface, wall, and ceiling.
•
Cabling Terminal Block
During installation, Power, Video, Communication,
Alarm Input cables are connected on to this cabling
terminal block.
•
DIP Switch
Adjusts camera ID and protocols.
Cabling Terminal
Block
DIP Switch
English – 11