Table of Contents
Advertisement
how to use osd menu
•
DISPLAY
[ON/OFF]
Sets if camera makes mask shows or not on images.
•
CLEAR
[CANCEL/OK]
Deletes data in the selected mask NO.
❖
Privacy Zone Area Setup
EDIT MASK 1
MOVE TO TARGET POSITION
[ENTER : SELECT]
Move camera to area to mask. Then the menu to
adjust mask size will be displayed.
❖
Privacy Zone Size Adjustment
EDIT MASK 1
[◄►:ADJUST MASK WIDTH]
[▲▼:ADJUST MASK HEIGHT]
[ENTER : SELECT]
Adjust mask size. Use joystick or arrow buttons to
adjust mask size.
(Left/Right)
(Up/Down)
To hide a certain zone completely regardless of high speed PT
motions, it is recommended that the size of mask must be 20%
bigger than original target size.
It is noted that during PAN/TILT control like jog action, the
object behind the privacy mask can be disclosed in a short
period of time.
28 – 10x Network Mini Smart Dome Camera
0/0/x1/N
Adjusts mask width.
Adjusts mask height.
MOTION SETUP
MOTION SETUP
PRESET LOCK
PWR UP ACTION
D-FLIP
JOG MAX SPEED
JOG DIRECTION
IMAGE HOLD
<PARKING ACTION SETUP>
BACK
EXIT
Setup the general functions of Pan/Tilt motions.
•
PRESET LOCK
[ON/OFF]
If Preset Lock is set to ON, it is impossible to set up
and delete Preset. It is possible only to run those
functions. To set up and delete those functions, enter
into OSD menu.
•
PWR UP ACTION
[ON/OFF]
Refer to "Other Functions"(page 23) section.
•
D-FLIP
[ON/OFF]
Refer to "Other Functions"(page 23) section.
•
JOG MAX SPEED
[2°/sec ~200°/sec]
Sets maximum jog speed. Jog speed is inversely
proportional to ratio of zoom. As zoom magnifi cation
goes up, pan/tilt speed goes down.
•
JOG DIRECTION
[INVERSE/NORMAL]
If you set this to 'Normal', the view in the screen is
moving same direction with jog tilting. If 'Inverse' is
selected, the view in the screen is moving reversely.
•
IMAGE HOLD
[ON/OFF]
At start point of preset movement, camera starts
freezing the image of start point. Camera keeps
displaying the image of start point during preset
movement and does not display the images which
camera gets during preset movement. As soon as
camera stops at preset end point, camera starts
displaying live images which it gets at preset end
point.
OFF
ON
ON
140/SEC
NORMAL
OFF
Advertisement
Table of Contents
