Camera Setup - Samsung SNC-C6225 User Manual

CAMERA SETUP

Setup the general functions of zoom camera module
ZOOM CAMERA SETUP
FOCUS MODE
DIGITAL ZOOM
IMAGE FLIP
<WHITE BALANCE SETUP>
<AUTO EXPOSURE SETUP>
BACK
EXIT
• FOCUS MODE [AUTO/MANUAL/ONEAF]
Sets camera focus mode.
ONEAF
This mode exchanges focus mode automatically
between Manual Focus mode and Auto Focus
mode. Manual Focus mode activates in preset
operation and Auto Focus mode activates when jog
operation starts.
With Manual mode at presets, Focus data is
memorized in each preset in advance and camera
calls focus data in correspondence with presets as
soon as camera arrives at a preset.
• DIGITAL ZOOM [ON/OFF]
Sets digital zoom function to ON/OFF. If this is set to
OFF, optical zoom function runs but zoom function
stops at the end of optical zoom magnifi cation.
• IMAGE FLIP [ON/OFF]
To display Upside down image.
how to use osd menu
ONEAF
ON
OFF
❖
White Balance Setup
WB SETUP
WB MODE
- RED ADJUST
- BLUE ADJUST
BACK
EXIT
• WB MODE [AUTO/MANUAL]
In Manual mode, Red and Blue level can be set up
manually
• RED ADJUST [10~60]
• BLUE ADJUST [10~60]
❖
Auto Exposure Setup
AE SETUP
BACKLIGHT
DAY/NIGHT
BRIGHTNESS
IRIS
SHUTTER
AGC
DNR
SENS-UP
BACK
EXIT
• BACKLIGHT [OFF/LOW/MIDDLE/HIGH]
Sets Backlight Compensation
• DAY/NIGHT [AUTO1/AUTO2/DAY/NIGHT]
The illumination condition for switching between Day
and Night modes of AUTO1 is brighter than that of
AUTO2.
• BRIGHTNESS [0~100]
Adjusts brightness of images. Iris, Shutter Speed and
Gain are adjusted automatically in correspondence
with this value.
• IRIS [AUTO/MANUAL(0~100)]
If Iris is set to Auto, Iris should have highest priority in
adjusting AE and Shutter Speed should be fi xed.
If Iris is set to Manual, Iris should be fi xed and Iris
has lower priority in adjusting AE, in comparison with
others.
AUTO
---
---
OFF
AUTO1
25
AUTO
ESC
NORMAL
MIDDLE
OFF
English – 35