Table of Contents
Advertisement
network connection & setup
CONNECTING THE CAMERA DIRECTLY TO A DHCP-BASED XDSL/
CABLE MODEM
This is enabled for a modem using DHCP.
Setting the IP Router
1.
Set the IP address referring to "Setting Static IP" on page 46 or "Setting Dynamic IP" on page 49.
2.
Launch an Internet browser on the local PC connected to the IP Router.
3.
Enter the IP Router's address in the address bar of the browser.
ex) http://192.168.1.1 ,http://192.168.0.1 or http://192.168.xxx.1
•
For the DDNS URL address, refer to "Checking the DDNS address" on page 51.
4.
When the IP Router is connected, the login window appears and prompts you to enter the password.
For the login IP and the password, refer to the IP router's documentation.
5.
When done, you will see the setup window of the IP router. In the setup menu, select <Automatic
Confi guration-DHCP> for <Internet Connection Type>.
For the menu location of <Internet Connection Type> or DHCP selection, refer to the IP router's documentation.
6.
When done, click the [Save] or [Apply] button to save the settings.
SNC-C6225
Connecting to the camera from a remote PC
1.
Launch an Internet browser on the remote PC.
2.
Enter the DDNS URL address in the address bar of the browser for connecting to the camera.
ex) http://e30002c.websamsung.net
•
For the DDNS URL address, refer to "Checking the DDNS address" on page 51.
To check if your xDSL / Cable modem uses DHCP, contact your Internet Service Provider.
xDSL or Cable Modem
DDNS Server
(Data Center, KOREA)
External Remote PC
English – 43
Advertisement
Table of Contents
