Table of Contents
Advertisement
4.
In the <PORT> fi elds, set up port numbers.
•
<HTTP Port>: A HTTP port used to connect to a camera using the
Internet browser. The default value is 80. The HTTP
port value can be changed by using the up/down
button to the right.
The HTTP port number starts with 80 and
increases/decreases to 10000, 10006, 10012...
•
<Device Port>: A port used to control video transmission. The
•
<TCP Port>: A port used to transfer video using TCP protocol.
The default value is 60002(TCP).
•
<UDP Port>: A port used to transfer video using UDP protocol. The default value is 60003(UDP).
•
<Upload Port>: A port used to upgrade software. The default value is 60004(TCP).
•
<Multicast Port>: Shows UDP port set for video transmission using UDP Multicast. The default value is
5.
Enter your password.
•
The default password is "4321".
•
The password is the camera login password of the root user.
6.
Click the [OK] button.
•
The manual network setting is fi nished.
7.
The camera is set to the manually entered IP and is restarted
❖
If more than one camera are connected to an IP Router
Set the IP and port settings for camera differently.
Items
IP Related
Items
Port Related Items
If <HTTP Port> is not set to 80,the user must specify the port number as well as the IP address in the Address input box of
an Internet browser to connect to the camera.
ex) http://IP Address: HTTP Port
e.g.) http://192.168.1.201: 10000
default value is 60001(TCP).
60005(UDP).
IP Address
Subnet Mask
Gateway
HTTP Port
Device Port
TCP Port
UDP Port
Upload Port
Multicast Port
setting static ip
1st Camera
192.168.1.200
255.255.255.0
192.168.1.1
80
60001
60002
60003
60004
60005
4
5
6
2nd Camera
192.168.1.201
255.255.255.0
192.168.1.1
10000
10001
10002
10003
10004
10005
English – 47
Advertisement
Table of Contents
