SAFETY PRECAUTIONS • This unit should only be used on a level surface and is intended for indoor use only. XMARK Fitness recommends an equipment mat be placed under the unit to protect the floor or carpet and for easier cleaning.
This manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact us at our XMARK Fitness help line. We have trained service technicians on site to take care of you, our valued customer.
Assembly NOTE: Hand tighten bolts and Nylon Lock nuts until machine is fully assembled. Step 1 Attach the Front Base (#4) to the Main Frame (#2), Using: • one M10*95 Button Head Cap Screw (#17) • two Φ11*Φ23*2 Flat Washers (#18) •...
Page 7
Assembly NOTE: Hand tighten bolts and Nylon Lock nuts until machine is fully assembled. Step 3 Attach two Roller Pad Tube (#5) into holes in the Main Frame (#2), and then attach four Foam Padding Φ110*Φ22*180 (#9) to Roller Pad Tube (#5), Using: •...
Parts List XM-7608 Parts List Ref # Part # Description P00057 Frame, Upright XM-7608 P00058 Main Frame, XM-7608 P00059 Long Seat Pad, XM-7608 P00382 Front Base, XM-7608 P00039 Roller Pad Tube P00582 End Cap 60, XM-7608 P00201 Hand Grip P00383...
VALID ONLY if the product is assembled / installed according to the instructions / directions included with the product. • In a light institutional setting, XMARK Fitness will extend a one year limited parts warranty and a lifetime frame warranty to the original purchaser.
Need help?
Do you have a question about the XM-7608 and is the answer not in the manual?
Questions and answers