This manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact us at our XMARK Fitness help line. We have trained service technicians on site to take care of you, our valued customer.
SAFETY PRECAUTIONS This unit should only be used on a level surface and is intended for indoor use only. XMARK Fitness recommends an equipment mat be placed under the unit to protect the floor or carpet and for easier cleaning.
Page 5
ASSEMBLY INSTRUCTIONS NOTE: Be sure to hand tighten all hardware until unit is fully assembled. STEP 1 Insert Upright Base (B) into Upright Coller (C) and attach with Ankle Bar (I) using a Nut Knob (E) STEP 2 Attach the Pad Assembly (D) to the Upright Collar (C) using the Bolt Kit (F), Pin (G), and hand tighten the Bolt Knob (J).
Page 6
STEP 3 Attach the Handle Bar (H) using a Nut Knob (E) to the Upright Collar(C) STEP 4 Slide Foam Rollers (A) to the shafts on the Pad Assembly (D)
EXPLODED VIEW AND PARTS LIST PARTS LIST Item Foam Roller Upright Base Upright Collar Pad Assembly Nut Knob Bolt Kit (M10 x 60 Bolt / M10 Nut / Washer) Handle Bar Ankle Bar Bolt Knob...
Residential Warranty ® ® This warranty applies only in the United States and Canada to products manufactured by XMark under the XMark brand name. This product is backed by a one-year residential warranty, excluding expendable parts such as paint, finish, and vinyl. This warranty extends only to you, the original purchaser.
Need help?
Do you have a question about the XM-4350 and is the answer not in the manual?
Questions and answers