Related Manuals for XMark Fitness XM-3109
Summary of Contents for XMark Fitness XM-3109
- Page 1 XM-3109 3' FOUR TIER DUMBBELL RACK Owner’s Manual Read all precautions and instructions in this manual before using this equipment. 8/09...
-
Page 2: Table Of Contents
Table of Contents Before You Begin Important Safety Information Parts Identifier Assembly Exploded View Parts List Warranty Information... -
Page 3: Before You Begin
This manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact us at our Xmark Fitness help line. We have trained service technicians on site to take care of you, our valued customer. -
Page 4: Important Safety Information
SAFETY PRECAUTIONS • This unit should only be used on a level surface and is intended for indoor use only. XMARK Fitness recommends an equipment mat be placed under the unit to protect the floor or carpet and for easier cleaning. -
Page 5: Parts Identifier
Parts Identifier (#3A) BASE FRAME, LEFT (#2) MAIN FRAME - RIGHT (#3) BASE FRAME, RIGHT (#2A) MAIN FRAME - LEFT (#4) SQUARE BRACKET (#9) LOCKNUT, M10 (#8) WASHER, M10 (#1) RACK M10 x 70MM ALLEN BOLT(#7) QTY 20... -
Page 6: Assembly
Assembly Prior to assembly, remove components from the box and verify that all the listed parts were supplied. Unpack all parts and place them in a clear area. Be sure to remove all packing material. NOTE: Hand tighten bolts and lock nuts until machine is fully assembled. STEP 1 Connect Left Upright Frame (2A) to Left Base Frame (3A) with two... - Page 7 Assembly NOTE: Hand tighten bolts and lock nuts until machine is fully assembled. STEP 2 Connect Right Upright Frame (2) to Right Base Frame (3) with two M10 x 70 Allen Bolts (7), two M10 Washers (8) and two M10 Lock Nuts (9).
- Page 8 Assembly NOTE: Hand tighten bolts and lock nuts until machine is fully assembled. STEP 3 Attach Dumbbell Racks (1) to Left and Right Upright Frames (2A) (2) with eight Square Brackets (4), sixteen M10 x 70 Allen Bolts (7) and sixteen M10 Washers (9).
-
Page 9: Exploded View
Exploded View... -
Page 10: Parts List
BASE FRAME, RIGHT 204053201503 BASE FRAME, LEFT 204053103503 BRACKET, SQUARE 307010000270 PLUG, INNER SQUARE 50 307010000042 SQUARE END FOOT 50 306010020728 ALLEN BOLT, M10X70 306010023108 WASHER, M10 306010022504 LOCK NUT, M10 306990000144 WRENCH, ALLEN S=6 299057204500 BOLT PACK 308030000383 MANUAL XM-3109... -
Page 11: Warranty Information
XMARK Fitness 7501 Trammel Drive Shreveport, LA 71108 Customer Service: 1-800-719-4605...
Need help?
Do you have a question about the XM-3109 and is the answer not in the manual?
Questions and answers