Table of Contents
Advertisement
PERIM
ALL
ARMING AND DISARMING AN ALL/PERIMETER SYSTEM
or
Press COMMAND. The keypad displays PERIM ALL (when arming) or DISARM?. Press the Select key
DISARM?
under the desired option. The keypad displays ENTER CODE: -.
Present your card to the reader. Once the system validates the card, if you choose PERIM, only the
perimeter arms. If you choose ALL, both areas arm. If programmed on a 32-character keypad, ALL
is automatically chosen for you after a short delay. All armed areas disarm automatically.
ARMING AND DISARMING A HOME/AWAY SYSTEM
ABC SECURITY
ARM
DISARM
Present your card to the reader. If the system is armed, once the system validates the
card, all areas are disarmed and the keypad displays ALL SYSTEM OFF.
If the system is disarmed when you present your card, once the system validates the
card, HOME SLEEP AWAY displays. You can manually press the Select key under the
desired option or after short time all areas automatically arm in the AWAY mode.
ENTRY DELAY
All Systems - Once the protected door is opened and the entry
ABC SECURITY
delay starts, the keypad displays ENTER CODE: - . Present your
ENTER CODE: –
card to the reader and, once validated, the system disarms
all areas and activates the Door Strike relay. The top line of
32-character keypads displays the zone name.
Area systems
provide a delay to allow selected areas only to be disarmed. See
Arming and Disarming above and on the previous page.
Using the access reader for user menu access
You can also use a card reader to access the User Menu when
MENU? NO YES displays.
Appendix
XR20 User's Guide
39
Advertisement
Table of Contents
