Quick Reference Wallet Cards; Pager Direct - Security Command XR20 User Manual

Quick Reference Wallet Cards

PhoneAccess™ Quick Commands
Press For this action
# then 1 Arm all
# then 2 Arm Perimeter
# then 3 Arm Perimeter/Interior
# then 0 Disarm all areas
#, 5, 4, 0, n* Toggles the output
*
Use outputs 1, 2, 3, or 4 in place of n. Enter output descriptions below.
1. ________________________ 3. _________________________
2. ________________________ 4. _________________________
PhoneAccess™ Quick Commands
Press For this action
# then 1 Arm all
# then 2 Arm Perimeter
# then 3 Arm Perimeter/Interior
# then 0 Disarm all areas
#, 5, 4, 0, n* Toggles the output
*
Use outputs 1, 2, 3, or 4 in place of n. Enter output descriptions below.
1. ________________________ 3. _________________________
2. ________________________ 4. _________________________
You will hear
3 short beeps Note: Zones
1 short beep
in a faulted
2 short beeps
condition
1 long beep
are force
1 short beep = on
armed
1 long beep = off
when the
4 short beeps = restricted
area arms.
You will hear
3 short beeps Note: Zones
1 short beep
in a faulted
2 short beeps
condition
1 long beep
are force
1 short beep = on
armed
1 long beep = off
when the
4 short beeps = restricted
area arms.
Cut along dotted lines.
Area Names
Your system areas are listed below:
Area Name Area Name
1. __________________ 2. ___________________
3. __________________ 4. ___________________
Service Department Phone: ___________________
Emergency Phone: ___________________________
Central Station Phone:________________________

Pager Direct™

Security Command™
Numeric Paging