Icom IC-A24E Instruction Manual page 9

!7 DIGIT KEYS
➥ Input the specifi ed digit during frequency input, mem-
ory channel selection, etc.
➥ In addition, each key has one or more secondary func-
tions after pushing
Push , then push [0•BANK], and rotate [DIAL]
to select the memory BANK number during mem-
ory mode operation. (p. 12)
Push , then push [1•DVOR] to select the DVOR
display from the CDI display in the NAV band. (p. 19)*
➥ Push
, then push [2•TO] to change the
course indicator characteristics to a "TO" fl ag in
the DVOR display in the NAV band. (p. 19)*
➥ Corrects the deviation while using the "TO" fl ag.*
➥ Push
, then push [3•FROM] to change the
course indicator characteristics to a "FROM" fl ag
in the DVOR display in the NAV band. (p. 19)*
➥ Corrects the deviation while using the "FROM"
1
fl ag.*
Push , then push [4•CDI] to select the CDI dis-
play from the DVOR display in the NAV band.
1
(p. 19)*
as follows:
1
Push
frequency in the NAV band. (p. 24)*
Push
function ON/OFF in the NAV band. (p. 24)*
Push
function ON/OFF. (p. 11)
Push
1
tone setting mode ON. (p. 11)
• Adjustable level; 0 to 9
Push
memory as a "TAG" channel. (p. 17)
1
1
* These functions are available on the IC-A24E only.
1
PANEL DESCRIPTION
, then push [5•DUP-W] to set the duplex
1
, then push [6•DUP] to turn the duplex
, then push [7• ] to turn the key lock
, then push [8•BEEP] to turn the beep
, then push [9•TAG] to set the displayed
2
2
1
5