Low Battery Indicator; Recall Function - Icom IC-A24E Instruction Manual

3
BASIC OPERATION

■ Low battery indicator

Low battery indicator appears
when the battery power has de-
creased to a specifi ed level. The
attached battery pack requires
recharging.

■ Recall function

The recall function stores the last 10 frequencies used.
The function stores frequencies when the frequency is pro-
grammed and transmitted on (except memory and emer-
gency channels).
D Recalling the stored frequencies
➥ Push
to recall the 1st stored frequency.
➥ Push
to recall the 10th stored frequency.
➥ Push [CLR•
DEL
• Recall number rotation
10
Low battery indicator
] to exit the recall function.
Recall number appears.
D Deletes the stored recall channel
q Push
w Push
• (e.g.) When the "r0" recall channel which is stored 120.450 MHz
is deleted, the "r1" recall channel which is stored 123.450 MHz
move up to "r0".
D Replaces the stored recall channel
q Push
placed.
w Push
• Replaces the selected channel into the previous channel when
is pushed and then
• Replaces the selected channel into the next channel when
is pushed and then
• (e.g.) To replace "r0" which is stored as 121.375 MHz into "r1",
push
NOTE: When the number of stored frequencies reaches
: Push
: Push 10, channels are automatically deleted as needed, in the
order they were entered, beginning the oldest.
or to select the channel to be deleted.
, then push [CLR• ] for 2 sec. to delete it.
DEL
or to select the recall channel to be re-
, then push or to replace it.
is pushed.
is pushed.
, then push .