Pioneer DEH-P9400MP Operation Manual page 9

This product features two demonstration
modes. Otne is the reverse mode and the other
is the feature demo mode.
If you do not carry out an operation within about
30 seconds. screen indicalions will start to
reverse, and then continue reversing every 10
seconds. Pressing the button 5 when power to
this product is switched off while the ignition
switch is se'c to ACC or ON cancels the reverse
mode. Press the button 5 again to start the
reverse mode.
The feature demo automatically starts when
power to this product is switched off while the
ignition switch is set to ACC or ON. Pressing
the button 6 during feature demo operation can-
cels the feature demo mode. Press the button 6
again to start the feature demo mode.
Remember that if the feature demo continues
operating when the car engine is switched OFF,
it may drain battery power.
0 The red lead (KC) of this product sl~ould be con-
nected to a terminal coupled with ignition switch ON
or OFF operations. If this is ijot done, the vehicle
battery [nay be drained.
Q When the source is off, you can check the location
of "5" and "F;' by turning on the feature demo.
This product is equipped with two forms of
basic display. You can select the desired dis-
play.
- For details, refer to "Changing the display form" on
page 55.