Pioneer DEH-P9400MP Operation Manual page 47

The auto-equalizer is the equalizer curve creat-
ed by auto-equalizing. (Refer to "Creating the
auto-equalizer curve" on page 50.)
0 Press A.EQ again to turn auto-equalizer
Off.
lfdK
0 "A.EQ" is not displayed if auto-equalizing has not
been carried out. III this case, ihis mode is inactive.
Lion to match the car interior acoustic character-
istics as desired. There are seven stored equal-
izer curves which you can easily recall at any
time.
1.
SBASS Super bass
PWRFL Powerful
NAT-RI- Natural
VOCAI-
Vocal
FLAT
Flat
CSTWl Custom1
CSTIV2 Custom2
* "CUSTOMS" and "CUSTOM2 are adjusted
equalizer curves that you can create for
yourself. (Refer to "Adjusting 13.band
graphic equalizer" on page 47.)
a When "FLAT" is selected the equalizer
makes no supplement or correction to the
sound. This is useful for checking the
effect of the equalizer curves by switching
alternatively between "FLAT" and a set
equalizer curve.
I\lote:
e You can also use and to select the desired
equalizer curve.
a If you do not operate the function within al-rout eight
seconds, the display is automatically returned.
The factory supplied equalizer curves, with the
exception of "FLAP", can be adjusted to a fine
increases or decreas-
es the equalizer curve respectively.
0 "+6" - "-6" is displayed as the equalizer
curve is increased or decreased.
Q The actual range of the adjustment differs depend-
ing oh which equalizer curve is selected.
e The equalizer curve with all frequencies set to 0
cannot be adjusted.
e You can use and r+ to select the desired equaliz-
er curve.