Pioneer DEH-P9400MP Operation Manual page 13

You can select the source you want to listen to.
To switch to built-in CD player, load a CD in this
product. (Refer to "Basic operation" on page
'I 7
1.
2.
3.
4.
Press SOURCE repeatedly to switch
between the following sources:
Built-in CD player (MPBIWMA) -+ TV tuner
---B Tuner -+ DAB tuner -+ XM tuner ---8' Multi-
CD player + External unit 1 - External unit
2-+AUX
0 When you press VOLUME. it extends out-
ward so that it becomes easier to turn. To
retract VOLUME, press it again.
Turn v
0 External unit refers to a Pioneer product (such as
one available in the future) that, although incompat-
ible as a source. enables control of basic functions
by this product. Two external units can be con-
trolled by this product, although "External" is dis-
played whether you select external unit 1 or external
unit 2. When two external units are connected, the
allocation of them to external unit 1 or external unit
2 is automatically set by this product.
* In the following cases, the sotrnd source will not
change:
* When no product corresponding to the source is
connected to this product.
* No disc is set in this product.
* No magazine is set in the multi-CD player.
* AUX (auxiliary setting) is set to off. (Refer to page
52.)
Q When this product's blue/white lead is connected to
the car's auto-antenna relay control terminal, the
car's auto-antenna extends when this products
source is switched on. To retract the antenna,
switch the source off.
SOFT KEY operation means that the function of
a button changes as indicated on the display.
The multi-function buttons provide SOFT KEY
operation; the functions performed by the but-
tons change according to the function or setting
that has been selected.
Function names
Multi-function buttons
The explanations given in this manual are
based on FORM 1 display. If you have selected
FORM 2, the functions of some of the multi-
function buttons may be different from those
indicated in the manual.
urn 2mt
In this manual, for operations using the multi-
function buttons the function displayed is used
as the name of the function button.