Pioneer DEH-P9400MP Operation Manual page 48

For "CUSTOMI" and "CUSTOM2" equalizer
curves, you can adjust the level of each band.
* A separate "CUSTOMt" curve can be created
for each source. (The built-in CD and the
multi-CD players are set to the same equaliz-
er adjustment setting automatically.) If you
make adjustments when a curve other than
"CUSTOM2" is selected, the equalizer curve
settings will be memorized in "CUSTOM?".
s A "CUSTOM2 curve can be created common
to all sources. If you make adjustments when
the "CUSTOM2" curve is selected, the "CUS
TOM2" curve will be updated.
1.
I the e~~~t~~~~ c~~we you waft to
t.
Refer to "Recalling equalizer curves" on
page 46.
50 -80-125 - 200~315++500
- 800 ++ 1.25k * 2k * 3.15k - 5k
s--s 8k * 125k (Hz)
4.
63
increases or decreas-
s "-r-6" - 'l-6" is displayed as the level is
increased or decreased.
* You can then select another band and
adjust the level.
5.
Octaver makes the bass sound louder.
With DDE, playback very close to the original
sound can be obtained by correction with a
combination of phase compensation and high-
range boost for the delay of the high-frequency
components and the amplitude deviation occur-
ring during playback. This function makes it
possible to reproduce the dynamic sound fielcl
as if you are listening to a live performance.
ate:
e Manufactured under license from BBE Sound: Inc.
The mark BBE is a trademark of BBE Sound, Inc.
"OCTAVER2" has a sfronyer effect than
"QCTAVERI".
to S~~~C~ ~~~~W~~"
r
again to cancel the octaver.
switches the octaver
With BBE sound processing technolagy, you
* Press l33E again to cancel the BBE.
Each press of A or v increases or decreas-
es the level of 5BE.
0 "-1.4': - "--g is displayed as the level is
increased or decreased.