Pioneer DEH-P9400MP Operation Manual page 46

This product is equipped with a subwoofer out-
put which can be switched on or off. When a
subwoofer is connected to this product, turn the
subwoofer output on.
The subwoofer output phase can be switched
between normal and reverse.
1. and
t the
2.
appears in the display.
* Press SW again to turn subwoofer output
off.
adjust the cut-off frequency and the output level
of the subwoofer.
or & selects cut-off ire--
or v increases or decreas-
es the level of the subwoofer.
0 "i-6" - "-24." is displayed as the level is
increased or decreased.
(1 "SW? is not displayed when the subwoofer output
is off in the subwoofer output mode (SW). In this
case, this mode is inactive.
not want low sound to play from the front or rear
speakers, turn the high pass filter on. Only fre-
quencies higher than those in the selected
range will be output from the front or rear
speakers.
"HPF ON" appears in the display.
0 Press HPF F again to turn the high pass fil-
ter off.
Each press of 4 or B selects frequencies in
the following order:
50 a-* 63 - 80 -+ 100 -c- 125 (l-k)
"HPF ON" appears in the display.
* Press HPF R again to turn the high pass
filter off.
Each press of Q or E)S selects frequencies in
the following order:
50 +-a 63 ++ 80 G-S 100 -i- 125 (Hz)