Pioneer DEH-P9400MP Operation Manual page 16

@Band
BLOC indicator
~@Preset number
@Frequency
@Stereo indicator
ress to s~~e~t ahe ~~~e~.
Press SOURCE until "Tuner" appears.
0 When you press VOLUME, it extends out
ward so that it becomes easier to turn. To
retract VOLUME, press it again.
to a~~~st the v~~~~e.
$0 s~te~~ me ~es~r~~
Press BAND repeatedly to switch between
the following bands:
FM-1 --PI FM-2 + FM-3 --se AM
to tme in to a s~a~~~~"
The frequencies move up or down step by
step.
a If you press and hold 4 or % for about one
second and release, you can perform seek
tuning. Seek tuning lets you skip broad-
casting stations until a broadcast strong
enough for good reception is found.
* If you press and hold Q or b-, you can skip
broadcasting stations. Seek tuning starts
as soon as you release the button.
* The stereo indicator "CY lights when a stereo sta-
tion is selected.
If you press any of the buttons 1 - 6, you can
easily store up to six broadcast stations for later
recall.
Press T to
lay "'3 II _ 'ye
Press NEXT until "1" - "6" appears.
a
want to
Y9
6
The station is stored in memory under the
selected button.
e Up to 18 FM stations, six for each of the three FM
bands, and six AM stations can be stored in memo-
ry.