Pioneer DEH-P9400MP Operation Manual page 18

@Source narne
aTrack number
@IDisc title
@Play time
[@Track title
The built-in CD player plays one standard 12
cm or 8 cm (single) CD at a time. Do not use an
adapter when playing an 8 cm CD.
When a CD is inserted, the front panel clos-
es automatically.
* When
you
press VOLUME, it extends out-
ward so that it becomes easier to turn. To
retract VOLUME, press it again.
Turn v
Pressing ti skips io the start of the next
track.
Pressing 4 once skips to the start of the cur-
rent track. Pressing again will skip to the
previous track.
* If you press and hold -a;i or B, you can per--
form fast forward or reverse.
The front panel opens and the CD is ejected.
+ Be sure to close the front panel by press-
ing EJECT after removing the CD.
the front panel left open. If the
front panel is left open, it may resull in injury
in the event of an acciden-i.
ok?:
* You can select CD as the source by pressing
SOURCE when a disc is loaded in this product.
a When the front panel is open, multi-function but-
tons are not available.
e Do not insert anything other than a CD into the CD
loading slot.
* A CD left partially inserted afler ejection may incur
damage or fall 01.11.
* If a CD cannot be inserted fully or playback fails,
[make sure the recorded side is down. Press the
EJECT and check the disc for damage before rein-
serting it.
0 If the built-in CD player cannot operate properly, an
error message (such as "ERROR-12") appears on
the display. Refer to "Understanding built-in CD
player error messages" on page 61.
Q You can eject ihe CD by pressing and holding
EJECT with opening the front panel when the CD
loading or ejecting cannot operate properly.