Quick Guide Instructions - Carrier Infinity Control Homeowner's Manual

Zone control

Hide thumbs Also See for Infinity Control:

Homeowner's manual (44 pages)

Installation instructions manual (20 pages)

Homeowner's manual (36 pages)

Table Of Contents

Table of Contents

QUICK GUIDE INSTRUCTIONS

This guide provides the basic operations for setting up and

operating your Infinity

Set Day, Time & Desired Humidity

1 Flip down the door at the base of the

Infinity

Control.

™

2 Press the BASIC button.

3 Adjust the highlighted HOUR setting

using the TIME (+\-) button.

4 Press SCROLL to highlight MINUTE.

5 Adjust the MINUTE setting using the TIME (+\-) button.

6 Press SCROLL to highlight DAY.

7 Adjust the current DAY setting, using the TIME (+\-) button,

until the correct day is displayed.

8 Press SCROLL to highlight HUMIDITY.

9 Press the red HEAT button to set the heating humidity.

10 Adjust the desired heating humidity using either (+\-) but-

ton.

11 Press the blue COOL button to set the cooling humidity.

12 Adjust the desired cooling humidity using either (+\-) but-

ton.

13 Press BASIC or close the door to exit.

Adjust Heating Temperature

1 Press the red HEAT button. Heating is confirmed when the

red LED adjacent to the red HEAT button is lit.

Control.

™

Table of Contents

Show Quick Links

Hide quick links:

Table of Contents

Need help?

Do you have a question about the Infinity Control and is the answer not in the manual?

Questions and answers

Nancy E Stanley

January 23, 2025

heat button won't turn on

1 comments:

Mr. Anderson

February 10, 2025

The heat button on the Carrier Infinity Control may not turn on due to several reasons:

1. System Mode – Ensure the thermostat is set to "HEAT" or "AUTO" mode. If it's in "COOL" mode, the heat button will not activate.
2. Temperature Setting – The set temperature must be higher than the current room temperature for heating to turn on.
3. Emergency Heat Mode – If the system is in emergency heat mode, the red HEAT button may behave differently.
4. LED Indicator – If the red LED adjacent to the HEAT button is not lit, the heating function may not be active.
5. System Malfunction – If the system is not responding, there may be an issue with the thermostat or HVAC system, requiring professional inspection.

This answer is automatically generated