Advanced Setup; Accessory Maintenance; Reminders - Carrier Infinity Control Homeowner's Manual
Zone control
Hide thumbs
Also See for Infinity Control:
- Homeowner's manual (44 pages) ,
- Installation instructions manual (20 pages) ,
- Homeowner's manual (36 pages)
Table of Contents
Advertisement
ADVANCED SETUP
Accessory Maintenance Reminders
The Infinity
Control can remind you when it's time to change the
™
filter, humidifier pad, UV lamps, and ventilator pre-filter with a pop-
up message. The REMINDERS screen allows you to individually
turn on or off your accessory maintenance reminders depending
on which accessories are installed.
1 Flip down the door near the base of the Infinity Control.
2 Press the ADVANCED setup button.
3 Use the SCROLL button to select the accessory service
reminder you would like to turn ON or OFF.
4 Use the TIME (+\-) button to turn the reminder ON or OFF.
A pop-up reminder will only appear when it is time for
maintenance if ON is selected.
5 For a detailed description of accessory maintenance
reminders, please see ACCESSORY POP-UP MESSAGES,
page 14 in this manual.
6 Press the LEFT or RIGHT side buttons to select another
ADVANCED feature.
7 To exit, push the ADVANCED button or simply close the door.
You may exit at any stage during this setup.
NOTE: You can exit Advanced Setup at any time. When
exiting, you will be prompted to save changes if you have
made any. Select "YES" to save your changes, "NO" to revert
back to previous settings.
- OR -
29
- Quick Links:
- Heating
- Unoccupied Function
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Infinity Control and is the answer not in the manual?
Questions and answers
heat button won't turn on
The heat button on the Carrier Infinity Control may not turn on due to several reasons:
1. System Mode – Ensure the thermostat is set to "HEAT" or "AUTO" mode. If it's in "COOL" mode, the heat button will not activate.
2. Temperature Setting – The set temperature must be higher than the current room temperature for heating to turn on.
3. Emergency Heat Mode – If the system is in emergency heat mode, the red HEAT button may behave differently.
4. LED Indicator – If the red LED adjacent to the HEAT button is not lit, the heating function may not be active.
5. System Malfunction – If the system is not responding, there may be an issue with the thermostat or HVAC system, requiring professional inspection.
This answer is automatically generated