Accessory Maintenance Pop-Up; Messages - Carrier Infinity Control Homeowner's Manual

Zone control
Hide thumbs Also See for Infinity Control:
Table of Contents

Advertisement

NORMAL OPERATION
Accessory Maintenance Pop-Up Messages
Accessory Pop-Up messages remind you when it's time
for accessory maintenance. There can be up to five messages,
depending on the accessories installed with your system:
- Replace UV Lamps
- Change Humidifier Pad
- Clean Air Filter - EAC
- Clean or Replace Air Filter
- Clean Ventilator Filter
REMIND LATER: Pressing the LEFT button to select
REMIND LATER will cause the accessory status message to reap-
pear in seven days. The message will not reappear at the end of
the seven-day period if the usage indicator has been reset.
DISMISS NOTICE: Press the RIGHT button to DISMISS NOTICE
and reset the accessory maintenance reminder. The reminder will
reappear at the next maintenance cycle.
The maintenance cycle for the humidifier, UV lamp and EAC is
based on time and may be set by your installer. The defaults are
as follows:
EAC:
Humidifier:
UV Lamp:
Ventilator Filter:
The maintenance cycle for MEDIA or EAC + MEDIA is based on
actual airflow restriction which is automatically detected by the
system.
3 months of operation
12 months of operation
12 months of operation
3 months of operation
14

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Infinity Control and is the answer not in the manual?

Questions and answers

Nancy E Stanley
January 23, 2025

heat button won't turn on

1 comments:
Mr. Anderson
February 10, 2025

The heat button on the Carrier Infinity Control may not turn on due to several reasons:

1. System Mode – Ensure the thermostat is set to "HEAT" or "AUTO" mode. If it's in "COOL" mode, the heat button will not activate.
2. Temperature Setting – The set temperature must be higher than the current room temperature for heating to turn on.
3. Emergency Heat Mode – If the system is in emergency heat mode, the red HEAT button may behave differently.
4. LED Indicator – If the red LED adjacent to the HEAT button is not lit, the heating function may not be active.
5. System Malfunction – If the system is not responding, there may be an issue with the thermostat or HVAC system, requiring professional inspection.

This answer is automatically generated

Table of Contents

Save PDF