Copying A Zone Schedule - Carrier Infinity Control Homeowner's Manual

Zone control

Hide thumbs Also See for Infinity Control:

Homeowner's manual (44 pages)

Installation instructions manual (20 pages)

Homeowner's manual (35 pages)

Table Of Contents

Table of Contents

PROGRAMMABLE FEATURES,

SETUP & OPERATION

5 Repeat steps 2 & 3 until YES appears for each day to which you

would like to copy.

6 Press the RIGHT button to copy or the LEFT button to cancel.

7 A confirmation screen will list the days you have selected. If the

list is correct, press the RIGHT button to confirm and return

back to the SCHEDULE function. If you would like to make a

change, press the LEFT button to return to the COPY DAY

screen.

NOTE: You can quit the programming process at any time by

simply pressing the SCHEDULE BUTTON or closing the door at

the bottom of the control.

Copying a Zone Schedule

You can copy an ALLDAYS schedule from one zone to another.

Individual day, WEEKDAYS, and WEEKEND schedules cannot be

copied to and from zones.

1 Press the SCHEDULE button to access the schedule screen.

2 Press the ZONE button until the name of the zone you wish

to copy from appears on the upper left screen.

3 If the text "ALLDAYS" appears at the top of the screen, you are

ready to start.

Press the LEFT or RIGHT button as needed until the text "ALL-

DAYS" is highlighted.

4 From the ALLDAYS screen, scroll down to the COPY ZONES

prompt. Press the RIGHT button.

5 You will be prompted to select YES to continue or NO to return

to the schedule screen. Press the RIGHT button to select YES.

– OR –

Table of Contents

Show Quick Links

Hide quick links:

Table of Contents

Need help?

Do you have a question about the Infinity Control and is the answer not in the manual?

Questions and answers

Nancy E Stanley

January 23, 2025

heat button won't turn on

1 comments:

Mr. Anderson

February 10, 2025

The heat button on the Carrier Infinity Control may not turn on due to several reasons:

1. System Mode – Ensure the thermostat is set to "HEAT" or "AUTO" mode. If it's in "COOL" mode, the heat button will not activate.
2. Temperature Setting – The set temperature must be higher than the current room temperature for heating to turn on.
3. Emergency Heat Mode – If the system is in emergency heat mode, the red HEAT button may behave differently.
4. LED Indicator – If the red LED adjacent to the HEAT button is not lit, the heating function may not be active.
5. System Malfunction – If the system is not responding, there may be an issue with the thermostat or HVAC system, requiring professional inspection.

This answer is automatically generated