Adjust Heating Temperature; Adjust Cooling Temperature - Carrier Infinity Control Homeowner's Manual

NORMAL OPERATION

Adjust Heating Temperature

The Infinity Control allows you to adjust your indoor temperature
™
at any time, overriding your programmed settings.
1 Press the red HEAT button. Heating is confirmed when the
red LED adjacent to the red HEAT button is lit.
2 Press the ZONE button until the name of the zone you wish
to control appears on the upper left screen. Selecting "ALL
ZONES" allows you to select one temperature for the entire
home. Press the ZONE button for three seconds to activate
the "ALL ZONES" features.
3 Use the TEMP (+\-) button to select your desired temperature,
which will be displayed on the lower right. An override time will
be displayed on the lower left. Please note an override time
will not appear if programming has been turned off.
4 You can change the override time in 15-minute increments by
pressing the TIME (+\-) button until the desired override time is
selected.
Press the HOLD button to override the schedule indefinitely.

Adjust Cooling Temperature

1 Press the blue COOL button. Cooling is confirmed when the
blue LED adjacent to the blue COOL button is lit.
2 Press the ZONE button until the name of the zone you wish to
control appears on the upper left screen. Selecting "ALL
ZONES" allows you to select one temperature for the entire
home. Press the ZONE button for three seconds to activate
the "ALL ZONES" feature.
- OR -
9