Advertisement
SetUP continued
5.
Place jar onto
base, making
sure the three
interlocking pins on the
underside of the collar
(f) fit into the rectangular
rubber connector on
the base (g).
g.
6.
Note: If jar does not sit flush on base, do not force it!
Remove jar and slightly turn the clutch (h) located
in the center of the top of the base.
IMPoRtANt
Do not throw away. Read before operating your new
Blend and Cook Soupmaker. Keep for future reference.
These helpful hints are intended to be a supplement to the Instruction Booklet.
In order to ensure safe operation and optimum performance,
please read the entire Instruction Booklet.
PG-27169A
f.
h.
GettING to KNoW YoUR CoNtRoL PANeL
1.
6.
1. Power on/off Button –
the heating or cooking
Press the button and the
cycle. The heater can be
red LED light will flash; the
manually turned off by
unit is now in Standby
pressing the Temperature
mode. If the On/Off button
control currently in use (this
is pressed while in Standby
will be illuminated) or
mode, the unit will turn off.
pressing the power On/Off
button. If the power On/Off
2. Cooking timer Control –
button is used to turn off
Note: Timer must be set
the heater, the unit will
before temperature can be
power off and must be
set. When the unit is in
restarted for blending.
Standby mode, the cooking
Note: Blending and
time can be set by pressing
cooking cannot operate
the + or – buttons. Time
simultaneously.
counts up or down in one-
minute increments, up to 30
4. Stir Button – The Stir
minutes. (Note: If – button is
function does just what it
pressed first, 30-minutes
says, allowing you to stir
will be displayed.) Hold but-
ingredients at a low speed.
ton down to scroll through
It can be operated at any
minutes, or press and
time during the cooking or
release to advance one
blending cycle. It can also
minute at a time.
be operated in Standby
mode when ingredients are
3. temperature Controls –
being added to the glass
Note: Cooking time must
jar. It is a manually operated
be selected before setting
function; it will stir only
temperature. The unit will
when pressed. Giving you
start its heating or cooking
complete control.
cycle when High, Medium or
5. Blending Control – The
Low temperature is selected.
The temperature can be
Blending control has 4
changed at any time during
speeds – 1 is the lowest
5.
4.
2.
3.
setting, 4 is the highest.
When in Standby mode, the
Blending function is active
and operable. Note:
Blending and cooking
cannot operate
simultaneously. When
blending hot items such as
soups or sauces, only use
speeds 1 through 3;
cooking will be non-
operational.
6. Pulse – The Pulse setting
can only be used in
Standby mode. This
function creates a burst of
power for quick blending.
Rotate counterclockwise,
release Blending control
and repeat as desired. You
determine the duration of
each pulse. The Pulse
function is best for breaking
apart larger pieces of food.
Note: Pulsing and cooking
cannot operate
simultaneously.
Advertisement
