Cuisinart SBC-1000 Quick Reference Manual

QUICK REFERENCE GUIDE – BLENDER
To activate blender Press On/Off - The blender is in Standby mode
To begin blending Turn dial to Speed 1.
To change speeds Turn dial to desired speed
To pulse In Standby mode turn dial to Pulse, then immediately release.
Repeat as needed
To crush ice In Standby mode pulse then blend on Speed 2 or until desired
consistency is reached
To stop blending (and deactivate Turn dial to Stop position and then press On/Off button
blender)
To stop blending Turn dial to Stop position
SPEED SELECTION GUIDE
Refer to this guide to choose the best blender speed for your desired result.
Ingredient/Recipe
Reconstituting frozen juice concentrate
Mayonnaise
Salad dressings
Nuts (shelled, ½ cup or less at a time)
Heavy or whipping cream
Bread, cookies or crackers (add ½-inch
pieces, 1 cup or less at a time)
Grating/chopping citrus zest (add 1 to 2
teaspoons sugar or salt from recipe)
Smoothies, shakes, health drinks
Baby food/fruit and vegetable purée
Frozen cocktails
Hard cheeses
then blend on 3 to 4
Spices
then blend on 2 to 3
Ice Pulse then blend on 2
TEMPERATURE GUIDE
High temperature
High Sauté
Bringing liquids to boil
Main Sauté temperature
Medium
Perfect Simmer temperature
Keep Warm Temperature
Low
Steeping
Speed Result
1 to 2 Smooth and full-bodied
1 Thick and creamy
1 Completely blended and emulsified
Coarse to fine
2
(20 to 30 sec.)
1 Thick, creamy topping (1 min.)
Coarse to fine as desired
2
(10 to 20 sec)
1 to 2 Uniformly fine
1 to 4 Smooth, creamy and thick
1 to 2 Smooth and creamy
1 to 4 Thick and slushy
Pulse first,
Coarse to fine
Pulse first,
Coarse to fine
Coarse crush to snowy
QUICK ReFeReNCe GUIDe
Blend and Cook
Soupmaker
SBC-1000
SetUP
1.
Place the collar with
blade assembly (a) on
a flat, sturdy surface.
Carefully place the rubber
gasket (b) inside the collar.
b.
a.
3.
Place lid (d) on jar
and push until secure.
Place measuring cup
(e) in the lid opening and press
into lid.
e.
d.
c.
Setup instructions continued on reverse side
2.
Place the blender jar (c)
on the collar and turn
clockwise until tight.
Note:
Blades
are sharp!
Handle
with care.
c.
4.
When placing jar onto
base, be sure arrow
on jar collar, located
just below the handle, is aligned
with arrow on base.