B Lid & Measuring Cup; C Control Panels; Power Button; Timer Control - Cuisinart SSB I U Manual

B Lid & Measuring Cup
To remove the lid from the glass jar, grip the edges of the lid firmly with one hand and lift upwards. When you
n
have added the required ingredients to the jar, place lid on jar before heating and blending. To replace, simply
position over the jar and press down firmly (ensure the pouring spout on the jar is covered by the protrusion
on the lid).
To remove the measuring cup from the lid, lift up and away. To replace, position the cup over the lid, aligning
n
with the corresponding grooves in the lid.
WARNING: Steam will escape around the measuring cup when the Soup Maker is in heat mode, this is
normal, but handle with care – steam can burn.
NB: Always ensure the lid and cup are replaced before blending.
C Control Panels

Power Button

Plug the unit into a mains socket. The 'On/ Off' button will begin to flash. This mechanism prevents accidental
n
activation of different functions.
Press the 'On/Off' button and the light will stop flashing. The unit is now in 'stand-by' mode and is ready to
n
use. You can now use the blend function or set both the timer and the cooking temperature.
NB: If you wish to reset the settings, press the 'On/ Off' button again. The button will resume flashing, any
setting you had selected will be cancelled.
NB: To turn the flashing 'On/ Off' button Off, turn off the mains switch and remove the plug.

Timer Control

The timer can be set for up to 30 minutes.
n
When switched on the timer will default to '0' and you can then set the cooking time by pressing the '+' or
n
'-' buttons. Every time you press on one of these buttons, you will hear a beep and the time will increase or
decrease by one minute. By holding the button down, you can scroll through the time quickly.
NB: You can increase or decrease the cooking time using the '+' and '-' buttons at any time during the cooking
cycles.
The screen displays the cooking time remaining
n
10