WARNING: Steam will escape around the measuring cup when the Hot & Cold Blender is in
heat mode, this is normal, but handle with care – steam can burn. Always ensure the lid and cup
are replaced before blending.
C CONTROL PANELS
Power Button
Plug the Hot & Cold Blender into the mains outlet, the power button (on/off) will flash. Press
once and the light will become static; the Hot & Cold Blender is now in 'stand-by' mode.
If the on/off button is pressed whilst in 'stand-by' mode, the Hot & Cold Blender will revert
back to dormant with the on/off button flashing. Any settings entered will be cancelled.
The only way to turn the flashing on/off button off is to unplug the Hot & Cold Blender from
the mains.
Timer Control
When the Hot & Cold Blender is in 'stand-by' mode the cooking time can be set by either
pressing the + or - buttons, if the '-' button is pressed at this stage, 30 minutes will be dis-
played on the digital display, this is the maximum cooking time. If the '-' button is pressed at
any other time, the cooking time will be reduced in one minute increments.
The '+' button increases the cooking time in 1 minute increments.
N.B. Pressing any of the buttons will be accompanied by an audible sound.
N.B. The cooking time can be increased or decreased by pressing the '+' and '-' buttons at any
time during the heating or cooking cycle.
Temperature Control
The Hot & Cold Blender will start its heating or cooking cycle when the temperature is
selected to either high, low or simmer.
N.B. The temperature can be changed at any time during the heating or cooking cycle.
Stir Button
The stir function can be operated at any time during the heating or cooking cycle, it can also
be operated in 'stand-by' mode when ingredients are being added to the glass jar.
It is recommended that you use the stir function while frying or sautéing onions, garlic or other
base ingredients at the start of your recipe.
It is not ideal to use the stir button to blend the soup but it can be used if you require chunky
soup.
Blending Control
The blending control runs from 1, a low speed, through to 4, the highest speed. Select desired
speed by twisting the dial clockwise, reduce speed by twisting the dial anticlockwise, or pulse
twisting the dial to the 'pulse' setting.
For safety, the blending control only works when the cooking or heating process has com-
pleted.
6