The Others Screen; Figure 44 Advanced > Others; Table 38 Advanced > Others - ZyXEL Communications NXC-8160 User Manual

Chapter 7 Advanced Settings

7.8 The Others Screen

Click Advanced > Others to open this screen. This is where you can set up the NXC-8160's
more advanced configuration parameters.
These settings can be configured across all ESSIDs or on a per ESSID basis. If you select Per
ESSID, then you must go to WLAN > ESSID Definition > ESSID Settings
page 43) to configure these settings on a individual ESSID basis. If you select All ESSIDs,
then the settings in this screen are applied globally to every ESSID in your set up.
Figure 44 Advanced > Others
The following table describes the labels in this screen.
Table 38 Advanced > Others
LABEL
802.11d Support
MAC Authentication
Beacon Rate Control
In Band Management
Rate Adaptation
Offset
RSSI Aging
92
DESCRIPTION
Select this to enable support for the 802.11d wireless standard .The purpose
of this standard is to provide regulation domains for each country in a
predefined list. The regulation domains and country information are provided
as part of the beacon's and probe response.
Select this option to authenticate each ESSID connection by using a client
computer's MAC address and an associated RADIUS server. Even if a client
computer does not support 802.1x authentication its connection can still be
authenticated in this manner.
Select this option if you wish to tune the beacon distribution mechanism. You
can tune the system to provide customized beacon coverage.
Select this option to allow management of the switch using computers
connected to the NXC-8160 through a particular ESSID or group or ESSIDs.
In band management ESSIDs must be on the same VLAN as the switch
management VLAN.
This option allows you to change the decision point for rate adaptation either
up or down and in doing so guarantee that the connection is maintained. The
trade-off is lower connection speeds.
Note: There is no need to change the default setting for this
option unless there are cases which require
compensation due to an unbalanced link
This option determines how long an RSSI reading is valid if no new readings
are available.
(Section 4.2 on
NXC-8160 User's Guide