Renaming Essids; Figure 20 Wlan > Essid Definition > Ssid Table; Table 15 Security: Wpa-Enterprise/Wpa2-Enterprise - ZyXEL Communications NXC-8160 User Manual

Chapter 4 WLAN Settings
The following table describes the labels in this screen.

Table 15 Security: WPA-Enterprise/WPA2-Enterprise

LABEL
Method
Group Rekey
Interval
RADIUS Server
(1-4)
WPA2 Only
TKIP Only

4.2.3 Renaming ESSIDs

Click the Rename button in the WLAN > ESSID Definition > ESSID Settings screen to
change a currently selected ESSID. The ESSID Table screen opens.
If you rename an ESSID, all currently connected wireless clients will be
suddenly disconnected. They must use the new ESSID in order to re-connect.
Figure 20 WLAN > ESSID Definition > SSID Table
54
DESCRIPTION
Select WPA-Enterprise/WPA2-Enterprise from the drop-down list.
This is the rate at which the RADIUS server sends a new group key out to all
clients. The re-keying process is the WPA equivalent of automatically changing the
WEP key for an AP and all stations in a WLAN on a periodic basis. Enter a time
interval between 0 and 3600 seconds.
The NXC-8160 can use an external RADIUS server to authenticate users. .
RADIUS servers are checked in order from 1 to 4 (for example, if server 1 is not
found or authentication fails then the NXC-8160 tries server 2, and so on).
Select a RADIUS server from the list. You can configure a list of RADIUS servers
on the WLAN > ESSID Definition > RADIUS screen. For more information, see
Section 4.4 on page 56.
Select this option to only allow clients that support WPA2 to connect wirelessly to
the NXC-8160 network.
Select this option to only allow clients that support TKIP to connect wirelessly to the
NXC-8160 network.
NXC-8160 User's Guide