The Passwords Screen; Figure 32 System Tools > Passwords; Table 27 System Tools > Passwords - ZyXEL Communications NXC-8160 User Manual

Table 26 System Tools > Time & Date
LABEL
Manually
Save
Update Now
Apply

6.6 The Passwords Screen

Click System Tools > Passwords to open this screen. This is where you can change the NXC-
8160's management passwords.
Figure 32 System Tools > Passwords
The following table describes the labels in this screen.
Table 27 System Tools > Passwords
LABEL
Level
Current Password
New password
Retype new
password
Save
NXC-8160 User's Guide
DESCRIPTION
Select this option and then enter the time and date by hand in the fields provided
if you want the NXC-8160 to use a manual time setting.
If using the Internet Time option, click Save to store your time and date
configuration information.
If using the Internet Time option, click Update Now to force the NXC-8160 to
connect with the currently configured NTP server to retrieve the time and date.
Click Apply to store your changes.
DESCRIPTION
Select the user name (admin, operator, or root) you want to configure in this
screen.
To access the web configurator, use the admin user name.
To configure the NXC-8160 through a secure SSH connection or telenet
connection, use the operator user name.
To configure the NXC-8160 via the console port, use the root user name.
Note: All three user names can be logged in simultaneously.
Type the default password or the existing password you use to access the system
in this field. By default, the password is default for all the user accounts (admin,
operator, or root) on the NXC-8160.
Type your new system password (at least 5 alphanumeric characters). Note that
as you type a password, the screen displays a (*) for each character you type.
Type the new password again for confirmation.
Click Save to save your changes back to the NXC-8160.
Chapter 6 System Tools
71