Chapter 6 System Tools
6.2 The Apply Screen
Click System Tools to open this screen. This is where you can globally apply any changes
made on the other screens in the NXC-8160 web configurator.
You must come to the this screen and click the Apply button whenever you
make changes to teh NXC-8160's configuration. If you do not, the changes will
only be applied the next time you restart the device.
Figure 28 System Tools > Apply
The following table describes the labels in this screen.
Table 23 System Tools > Apply
LABEL
Apply
6.3 The Reboot Screen
Click System Tools > Reboot to open this screen. This is where you can force the NXC-8160
to reboot itself without having to manually unplug it and then plug it again.
Figure 29 System Tools > Reboot
The following table describes the labels in this screen.
Table 24 System Tools > Reboot
LABEL
Reboot
68
DESCRIPTION
Click Apply to store your changes.
DESCRIPTION
Click Reboot to force the NXC-8160 to restart itself.
NXC-8160 User's Guide