The Maintenance Screen; Figure 30 System Tools > Maintenance; Table 25 System Tools > Maintenance - ZyXEL Communications NXC-8160 User Manual

Do not reboot the NXC-8160 while a firmware upload is in progress. You could
damage the device!

6.4 The Maintenance Screen

Click System Tools > Maintenance to open this screen. This is where you can save your
NXC-8160's configuration settings, restore a previously saved configuration file, or reset the
device to its factory default configuration.
Figure 30 System Tools > Maintenance
The following table describes the labels in this screen.
Table 25 System Tools > Maintenance
LABEL
Save Configuration
Save...
Upload Configuration
Upload
Configuration
Browse...
Upload...
Factory Defaults
Defaults...
NXC-8160 User's Guide
DESCRIPTION
Click the Save button to save your NXC-8160's configuration settings as an
*.ecf file. When the button is clicked, your web browser prompts you to save the
file in a local destination.
Load a configuration file (*.ecf) from your computer to your NXC-8160. Type in
the location of the file you want to upload in this field or click the Browse button.
Click the Browse button to find the (*.ecf) file you want to upload.
Click the Upload button to overwrite your current configuration with the currently
selected configuration file.
Click the Defaults button to clear all user-entered configuration information and
return the NXC-8160 to its factory defaults.
Chapter 6 System Tools
69