Figure 40 Advanced > Centralized Configuration (Member Device); Figure 41 Advanced > Centralized Configuration (Master Controller); Table 34 Advanced > Centralized Configuration (Member) - ZyXEL Communications NXC-8160 User Manual

The screen changes depending on whether you select the Enable Master
check box. By default, this check box is not selected and the NXC-8160 acts
as a member device.
Figure 40 Advanced > Centralized Configuration (Member Device)
The following table describes the labels in this screen.
Table 34 Advanced > Centralized Configuration (Member)
LABEL
Enable Master
SSH Keys
Set key from disk Enter the path where the public key that you want to upload to the NXC-8160 is
Browse...
Set
When you select Enable Master, the screen changes to display the following parameters:
Figure 41 Advanced > Centralized Configuration (Master Controller)
NXC-8160 User's Guide
DESCRIPTION
Select this option to have the NXC-8160 act as a master controller.
You can manage the member controllers through the master controller.
stored on your computer or LAN. You should have received the key from the master
controller and saved it on your computer.
Note: This field only appears when the NXC-8160 is a member
device. In master controller mode, this option is not here.
Click the Browse button to open your operating system's browse dialog box and
locate the public key file.
Click Set to use the public key entered in the Set key from disk field.
Chapter 7 Advanced Settings
83