Expanding Raid Storage Capacity; Technical Support - HighPoint RocketStor 6328 User Manual

Thunderbolt 2 raid host adapters

Hide thumbs Also See for RocketStor 6328:

Table of Contents

e. Replace the failed drive with a new disk module and secure in place. Once the drive has spin up to speed,

the WebGUI will indicate that the array is rebuilding (The "Status" shows Rebuilding and the percentage

complete) as shown below. The rebuild time is approximately 2 hours per TB.

Once the rebuild is complete, the RAID array will return to the Normal status. Your data is now secure.

10.

Expanding RAID Storage Capacity

Note: Mac OS X cannot support partition expansion – DO NOT attempt to use the WebGUI's OCE or ORLM functions

with a Mac system.

To Expand RAID storage capacity:

Back up all original data to a separate storage device.

b. Delete the current RAID array

Create a new array using the original and added disks.

d. Restore the data from the backup source to the new array.

If you encounter any problems while utilizing the HighPoint RocketStor Thunderbolt Series product, or have any

questions about this or any other HighPoint Technologies, Inc. product, feel free to contact our Customer Support

Department.

Web Support:

http://www.highpoint-tech.com/websupport/

Thunderbolt™ Support:

Phone: (408)240-6108

Skype: HighPoint.Thunderbolt

HighPoint Technologies Inc.

Table of Contents