Table of Contents
Advertisement
RocketRAID BIOS Utility
BIOS Commands
Create - this command is used to open the RAID Creation menu.
Delete - this command will delete the selected RAID array.
Add/Remove Spare - this command is used to assign hard disks to function as spare
disks. The controller is capable of using spare disks to automatically rebuild broken or
faulted RAID arrays.
Settings - this command opens the settings menu (selecting the boot disk/array,
staggered drive spinup)
View – this command is used to select between two views: Devices (HARD DISKS),
and Arrays (configured RAID arrays).
Initialize - this command is used to prepare disks for use with RAID arrays. Disks
must be initialized before they can be used to create arrays.
2 - Creating RAID Arrays
Initializing Disks:
Before creating a RAID array, the disks must be initialized. Disk initialization writes
necessary RAID configuration information to the hard disks. Select the Initialize
command from the toolbar, and press ENTER.
16
Advertisement
Table of Contents
