Table of Contents
Advertisement
5.3 BIOS Commands
Create – This command is used to open the RAID Creation menu.
Delete – This command will delete the selected RAID array.
Add/Remove Spare – This command is used to assign hard disks to function as spare disks. The controller
is capable of using spare disks to automatically rebuild broken or faulted RAID arrays.
Settings – This command opens the settings menu (To selecting the boot disk/array, staggered drive
spinup etc.)
View – This command is used to view hard disk and RAID information.
Initialize – This command is used to prepare disks for use with RAID arrays. Disks must be initialized
before they can be used to create arrays.
5.4 Creating RAID Arrays
Initializing Disks:
Before creating a RAID array, the disks must be initialized. Disk initialization writes necessary RAID
configuration information to the hard disks. Select the Initialize command from the toolbar, and press
Enter key.
11
Advertisement
Table of Contents
