Table of Contents
Advertisement
Verifying Installation (Linux)
1.
Open terminal and enter the following command:
lspci
2.
If the driver is installed properly, an "ASM2142 USB 3.1 Host
Controller" entry should be displayed.
Connecting USB Storage Devices
1. Power on the system.
2. Connect the USB device to the HighPoint RocketU HBA with a USB
cable.
3. For hard drives or enclosures, allow the device to spin up for a few
moments. Once the devices are ready, they will be recognized by
the operating system and can be accessed as needed.
7
Advertisement
Table of Contents
