Rs6328 Audible Alarm; Setup Rs6328; Storage Enclosure Preparation - HighPoint RocketStor 6328 User Manual

Thunderbolt 2 raid host adapters

Hide thumbs Also See for RocketStor 6328:

Table of Contents

Back side:

5. RS6328 Audible Alarm

The RS6328 has an internal Alarm buzzer. The Alarm buzzer is for HDD failure (offline) status notification and it

will emit a high pitch continuous sound. This alarm will sound when a disk failure occurs or a disk or an array is

removed without using the "unplug" feature in the WebGUI. When the sound is triggered, follow the steps

below to check the HDD status and mute the alarm:

a. Open the WebGUI and switch to the logical tab. The alarm can be stopped using the WebGUI's Mute button,

or the Rescan function found under the Physical or Logical tabs.

b. Check the physical device status if there are any disabled drives.

Locate the disk module number.

d. If the RAID is in critical status, please follow "Chapter 8 RAID Disk Failure Recovery" to recover the RAID disk

e. For other RAID status, please refer p.14 for RAID recovery

6. Setting up the RocketStor 6328

RS6328 support two types of storage enclosure: External Mini-SAS and External SATA (eSATA). Each type of

enclosure requires a specific type of cable.

HighPoint cable options:

EXT-MS-1MMS – External Mini-SAS to External Mini-SAS (SFF-8088 to SFF-8088)



EXT-MS-1MEJ – External Mini-SAS to External SATA (SFF-8088 to 4x eSATA)



HighPoint Technologies Inc.

Table of Contents