Table of Contents
Advertisement
5.2 Setting - Email
The HighPoint RAID controller can be configured to send Event Log entries to one or more E-Mail addresses. The
email setting has SMTP setting and recipient which users need to configure it.
A. Enable Event
Notification:
B. Server address:
C. Mail From:
D. Login Name:
E. Password:
F. SMTP Port:
G. Support SSL:
H. Support SSL:
I. Name:
J. Event level
Check this item to enable Event Notification
This is SMTP mail server address. It can be IP address or SMTP name
This is email address of the sender
The login name of send's email account
The login password of send's email account
This is SMTP port number. The default is 25 for non-SSL SMTP server
Check this box if using SSL SMTP and change SMTP port to SSL port
number. Click "Change setting" to save new information.
Setup the recipient's email address
The name of the recipient
Check which information that you want to send out for monitoring. The
"Test" check-box is used to verify if email setting is working.
HighPoint Technologies Inc.
31
Advertisement
Table of Contents
